Products
SMC-K1Ti-As 2 Axis Turning/Lathe CNC Controller
Features:
1. 7 inch TFT color LCD with the resolution of 800×480.
2. The system has both the U-disk and RS232 interface, through which it is possible to exchange information between system and U-disk or computer. The system software can be updated with a U-disk.
3. The X-axis and Z-axis can be controlled simultaneously and the accuracy can reach up to 1μm. The max rapid traverse rate is
4. Various of machining operations are satisfied by
5. Support tool length compensation, tool nose radius compensation and backlash compensation.
6. With the function of linear and exponential acceleration/deceleration control and block pre-processing, high-speed and high-precision machining can be satisfied.
7. Taper thread, straight thread, and variable-pitch thread with both single-start and multi-start can be cut; The length, angle and speed for thread retreating can be specified.
8. Taper thread, straight thread, and variable-pitch thread with both single-start and multi-start can be cut; The length, angle and speed for thread retreating can be specified.
9. Display tool path by GRAPH function, full Chinese interface, complete help information, more conveniently to operate.
Specification:
Item | Description | Specification | |
Controlled Axes | Number of axis controlled | 2 axes (X, Z) | |
Number of axis controlled simultaneously | 2 axes | ||
Command | Least Command Unit | 0.001 mm | |
Least Move Unit | 0.001 mm | ||
Maximum Command Value | ±9999.999 mm | ||
Feed | Traverse (Maximum) | 15000 mm/min | |
Feed rate range | mm/min (Per-Minute Feed) | 1~12000 mm/min | |
mm/r(Encoder of 1024 pulse/r is required) (Per-Revolution Feed) | 0.0001~500.0000mm/r | ||
Lead of Thread | 0.0001~500.0000 mm | ||
Automatic Acceleration/Deceleration | Provided(linear, exponential) | ||
Feed Rate Override | 0~150% | ||
Manual | Manual Continuous Feed, Manual return To Reference Point, Step feed | One axis a time, ×1, ×10, ×100 | |
Manual pulse generator | Provided | ||
Interpolation | Positioning, linear/circular interpolation | G00, G01, G02/G03 | |
Test | Dry run, Single Block | Provided | |
Canned cycle | Inner/outer diameter cutting cycle | G90 | |
Thread cutting cycle | G92 | ||
Canned Tapping Cycle | G93 | ||
Facing cycle | G94 | ||
Multiple repetitive cycle | Outer Diameter Rough Turning Cycle | G71 | |
Rough Facing Cycle | G72 | ||
Canned Turning Cycle | G73 | ||
End Peck drilling Cycle | G74 | ||
External/Internal Slotting Cycle | G75 | ||
Multiple Thread Cutting Cycle | G76 | ||
Enhanced Thread Cutting Cycle | G78 | ||
Coordinate system and Dwell | Dwell(sec) | G04 | |
Coordinate system setting | G50 | ||
Auto coordinate system setting | Provided | ||
Run mode | MDI, Auto, Jog, Step, Edit | Provided | |
Safety | Stored Stroke Check | Provided | |
Stored Stroke Check Disabled/ Every Axis Disabled | Provided | ||
Emergency Stop | Provided | ||
Program storage and edit | Program Storage Capacity, Stored Program Number | 32kB, 63 | |
Program Edit | Insert, modify, delete, copy | ||
Program No. , Sequence No., Address, Word Search | Provided | ||
Decimal Point Programming, Optional Block Skip | Provided | ||
Flash Memory | Provided (six partitions) | ||
Display | LCD | 800×480, 7 inch color LCD | |
Position, Program, Tool Compensation, Alarm, Test, Diagnosis, Parameter | Provided | ||
Graph, Work-piece Counts | Provided | ||
M, S, T function | I/O: 20/16 points | Input: (panel: 4 points, machine tool: 16 points) | |
Miscellaneous Function | 2-digit M code | ||
Spindle Function | 2-digit S code (gears) or 4-digit S code (analog spindle) | ||
Analogue Spindle(S4 bit), Constant Surface speed Cutting | Provided (8-bit D/A output) | ||
Tool Function | T01~T08 | ||
Tool Rest Signal Timing Scan Check function | Provided | ||
Compensation function | Tool Compensation Memory | ±6 bit, 8 groups | |
Tool Compensation Count Mode Input | Provided | ||
Tool Compensation Measurement Mode Input | Provided | ||
Tool Tip (Nose) Radius Compensation (Tool Compensation C) | Provided | ||
Backlash Compensation | Provided | ||
Switch | Program Switch, Parameter Switch | Provided | |
Communication | RS232 communication | Provided | |
U Disk Communication | Provided | ||
Other functions | Circular Radius R Setting | Provided | |
Electronic Gear Ratio | Provided | ||
Back Tool Rest Selection | Provided | ||
Power Off Work-Piece Coordinate Recall | Provided | ||
Rotary Axis Setting | Provided | ||
Clock | Provided | ||
Tailstock function | Provided | ||
Auto lubricating function | Provided | ||
Power Off Work-Piece Coordinate Recall | Provided | ||
Suited driver for CNC system | KND step motor driver | ||
The Add-on Panel of CNC System for Lathes | Optional | ||
Dimension:
