SMC-K100Ti-B 2 Axis Turning/Lathe CNC Controller

Features:

1. 7 inch TFT color LCD with the resolution of 800×480.

2. The system has both the U-disk and RS232 interface, through which it is possible to exchange information between system and U-disk or computer. The system software can be updated with a U-disk.

3. The X-axis and Z-axis can be controlled simultaneously and the accuracy can reach up to 1μm.

4. Various of machining operations are satisfied by 28 G codes and 26 M codes.

5. The max rapid traverse rate is 24 m/min, and the max feed rate is 20 m/min.

6. Support tool length compensation, tool nose radius compensation and backlash compensation.

7. Taper thread, straight thread, and variable-pitch thread with both single-start and multi-start can be cut; The length, angle and speed for thread retreating can be specified.

8. With the function of linear and exponential acceleration/deceleration control and block pre-processing, high-speed and high-precision machining can be satisfied.

Item	Description		Specification
Axis	Controlled Axis Number		2 (X, Z)
	Simultaneously Controlled Axis Number		2
Command	Lease command unit		0.001 mm
	Least movement unit		0.001 mm
	Maximum command		±9999.999 mm
Feed	Rapid traverse rate		24000mm/min (Max.)
	Feed rate	per min	1～20000mm/min
		per revolution	0.0001～500.0000 mm/r
	Thread lead		0.0001～500.0000 mm
	Automatic acc./dec.		Supplied (Linear, exponential)
	Feedrate override		0～150%
Manual	Manual continuously feed Manually return to reference point Step feed		One axis at the same time ×1, ×10, ×100
	Hand wheel		Supplied
Interpolation	Positioning Linear interpolation Circular interpolation		G00 G01 G02/G03
Debug function	Dry running Single block funning		Supplied
Canned cycle	Internal/external cylindrical turning		G90
	Thread cutting cycle		G92
	Tapping cycle		G93
	Facing cycle		G94
Multiple canned cycle	Finishing cycle		G70
	Outer diameter rough turning		G71
	Rough facing cycle		G72
	Canned turning cycle		G73
	End peck drilling cycle		G74
	External/internal slotting cycle		G75
	Multiple thread cutting cycle		G76
	Enhanced thread cutting cycle		G78
Coordinate system and dwell	Dwell (second)		G04
	Coordinate system setting		G50
	Auto coordinate system setting		Supplied
Mode	MDI, Auto, JOG, Step, Edit		Supplied
Safety functions	Stored stroke check		Supplied
	Mask stored stroke check		Supplied
	Emergency stop		Supplied
Program storage and edit	Memory space and program number		32kB, 63
	Editing		Insert, modify, delete, copy
	Search function (Program no. sequence no. address, word)		Supplied
	Decimal programming Optional block skip		Supplied
	Electronic disks		Supplied, 6 regions
Display	TFT LCD		800×480, 7 inches
	Position information, program, tool offset, alarm, diagnosis data, debug, parameter		Supplied
	Graph, workpiece count		Supplied
M, S, T	I/O points: 20/16		Input: 4(panel)+16(machine)
	Miscellaneous function		M + 2-digit
	Spindle function		S + 2-digit
	Analog spindle (s+4digit) Constant surface speed cutting		Supplied (8-digit D/A)
	Tool function		T01~T08
	Tool rest signal checking function		Supplied
Compensation function	Memory		±6, 16 group
	Input by counting		Supplied
	Input by measuring		Supplied
	Type C tool compensation function		Supplied
	Backlash compensation		Supplied
Switch	Program switch Parameter switch		Supplied
Communication	RS232		Supplied
	U-disk		Supplied
Other function	Circular radius R setting		Supplied
	G10		Supplied
	Electronic gear ratio		Supplied
	Remember workpiece coordinate		Supplied
	Back too rest function		Supplied
	Start execution at random position		Supplied
	Rotary axis function		Supplied
	Clock and machining time		Supplied
Optional function	Additional machine operator’s panel		Optional

Dimension: