Products
SMC-K1000Ti-A 2 Axis Turning/Lathe CNC Controller
Features:
1. Adopt 32-bit microprocessors to achieve high-speed and high-precision control with the interpolation period reaching up to 1 ms.
2. Using fore-acceleration control to obtain higher machining accuracy.
3. Equipped with a 7 inches TFT color LCD with the resolution of 800×480.
4. Provide preparatory functions (G code) compatible with those of FANUC.
5. Provide electronic disks to save data and parameters in multi-places, which is convenient to recover when malfunction happens.
6. The rapid traverse rate reaches up to
7. Be able to cut thread at a high feed rate and retract at the rapid traverse rate with the chamfering angle adjustable.
8. Equipped with U-disk port through which CNC systems provide the following functions: exchange programs and machining data between a CNC system and a U-disk, update systems’ software.
9. Support the macro-B function.
10. Support the function of automatic handles, which is safe (prevent colliding) and convenient when trial cutting.
Item | Specification | |
Controlled axis number | 2 (X, Z) | |
Simultaneously controlled axis number | 2 | |
Least command unit | 0.001 mm, 0.0001 inch | |
Least movement unit | 0.001 mm 0.0001 inch | |
Maximum command | 8-digit | |
Rapid traverse rate | 60 m/min, 600 inch/min | |
Override of rapid traverse rate | FO, 25,50,100% | |
Range of fee rate | per minute | 1～30000 mm/min 0.01～600 inch/min |
per revolution | 0.0001～500.0000 mm/r 0.000001～9.999999 inch/r | |
Maximum spindle speed | 9999 | |
Thread lead | 0.0001～500.0000 mm 0.000001～9.999999 inch | |
Automatic acc./dec. | Supplied | |
Override of feed rate | 0～150% | |
Manual continuously feed | One axis or two axes at the same time | |
Positioning | Supplied | |
Interpolation | Linear, arc | |
Reference position returning | Supplied | |
LCD/MDI | 7 inches TFT, 800×480 | |
MDI soft buttons | 5+2 | |
Step | ×1，×10，×100 | |
External hand wheel interface | Supplied | |
I/O points | 40/24 | |
Pause(second) | Supplied | |
Machine lock | All axes | |
Stored stroke limitation check | Supplied | |
Dwell state | Supplied | |
Dwell | Supplied | |
Stored pitch error compensation | Supplied | |
MDI running | Supplied | |
Reset | Supplied | |
Dry running | Supplied | |
Single block | Supplied | |
Program protection | Supplied | |
Self-diagnosis | Supplied | |
Emergency stop | Supplied | |
Status | CNC ready | |
Servo driver ready | ||
Alarm status | ||
allocate finishing signal | ||
Auto running status | ||
Auto-run start signal | ||
Auto-run pause signal | ||
Power ready signal | ||
Reset signal | ||
Power source | Single phase: AC220V±15%，47～63Hz | |
Coordinate system setting | Supplied | |
Automatic coordinate system setting | Supplied | |
Decimal point programming | Supplied | |
G10 | Supplied | |
Macro program | Macro B function, Macro-interruption function | |
Metric/inch programming | Supplied | |
Canned cycle | Canned cycle（G90/G92/G93/G94）， Multiple canned cycle（G70～G76） | |
Backlash compensation | Supplied | |
Circular radius R specifying | Supplied | |
Miscellaneous function | M+2-digit | |
Miscellaneous function lock | Supplied | |
Spindle function | S+2-digit or S+4-digit | |
Analog spindle | Supplied | |
Shift gear function for analog spindle | Supplied | |
Spindle speed override | 50～120% | |
Tool function | T01～12 | |
Tool offset number | ±6-digit, 16 groups | |
Tool compensation | Tool length compensation, Tool nose radius compensation | |
Edit function | Input parameter or diagnosis data by bit, copy/move/merge programs, execute multiple blocks in MDI mode | |
Program memory space | 640K | |
Maximum program number | 512个 | |
Display program number | Supplied | |
Search sequence number | Supplied | |
Search program number | Supplied | |
Optional block skip | Supplied | |
Program switch | Supplied | |
Language | Chinese, English | |
Machining time Workpiece number | Supplied | |
Actual spindle speed | Supplied | |
Display spindle speed, M, S, T command | Supplied | |
Path graph | Supplied | |
