Contact Us | Language:
Products

SMC-K1000TIV 2 Axis Turning/Lathe CNC Controller


Features:

1. Apply 32-bits powerful CPU to achieve high-speed, high-precision control. The maximum speed reaches up to 30 m/min.

2. 10.4 inch TFT LCD with the resolution of 640×480.

3. Six layer main board applying SMT, custom-build FPGA, high integration technology, perfect structure design ensures that the system has high reliability and high anti-interface capability.

4. Support the open-style PLC function to meet the secondary development of the machine tool builder.

5. Two types of machine control panels including the standard panel with film-buttons and one with pushed buttons are available. On the later one the functions of the 50 pushed buttons and 50 lamps are able to defined by customs.

6. Remote I/O modules based on CAN bus can be use to extend the number of I/O points up to 512/512.

7. Chinese operation interface and full help information make the operation more conveniently.

8. Perfect self-diagnosis function. Display the internal and external states in real time and alarms will be issued timely when some abnormity happens.

9. Powerful instruction execution ability to achieve the high-speed, small-line-section machining

10. High-speed DNC machining are available based on the transmit rate reaches up to 115200 bps and large program buffer space.

11. 640 kB internal program memory space. U-disk port can be use to extend the space of program and to perform DNC machining.

12. Rich NC functions: macro program B, rigid tapping, local coordinate system, coordinate system rotation, coordinate scaling, polar coordinate system, etc.


Specification:

Functions

Specifications

Functions

Specifications

Controlled Axes

X、Z or X、Y、Z、C

Metric/inch conversion

Provided

Simultaneous Controlled Axes

2 or 4

Communication Function

RS232 port(Baud Rate up to 115200)

Interpolation Mode

Linear/Circular

Program, parameter, offset data download from / upload to PC available

Least Programming Unit

0.001 mm or 0.0001 inch

Remote Control

Download/Upload PLC Program, Machining Program

Largest programming value

±99999.999 mm

USB Interface

Yes

Max Rapid Travel Speed

30000.000 mm/min

Macro Program

Macro A or B

Max Feed Speed

15000.000 mm/min

(or 30000m/min)

Emergency Stop, Stroke Limit

Emergency stop signal, soft and hard travel limit

Feedrate Override

Manual / Auto 0~150% 16 Levels

Alarm

P/S alarm, driver alarm, over travel alarm

Instant adjustment by band-switch (on Add-on panel)

System error alarm, external alarm

Program Storage /Count / Electronic Disk

640kB/128/3

(640kB/512/3 optional)

Acceleration /

Deceleration

Linear, exponential

Monitor

10.4 inch color TFT LCD

Return Reference Point

Manual and Auto

Resolution 640×480 / Chinese or English user interface

Electric Gear Box Ratio

1~127 : 1~127

Additional Operation Interface

Additional panel, separated control box

Machine Tool Control

Machine tool lock, feed hold, program block skip

Display

Position, timer, cycle counter, date, time, speed and so on

Feed Control

Auto, manual, jog, hand wheel

Graphics Function

Graphic parameter setting and graphic display

DI/DO Ports

DI: 40 points, DO: 24 points

Expansible up to 512 / 512 via CAN bus

PLC Function

Open PLC

Driver Configuration

Digital AC Servo Driver

Tool Compensation

Tool length compensation

Measurement Function

Provided

Backlash Compensation / Pitch Error Compensation

Cutter length, tool nose radius compensation (Compensation C)

Simple/Complex Cycles

Provided

Spindle Function

Gears control, analog voltage, rigid tapping

Thread Cutting

Straight Thread, Taper Thread, End Thread, Variable-pitch Thread

Auxiliary Functions

Manual / MDI / auto controlled spindle forward or backward turning

Diameter/Radius Programming

Provided

Stop, coolant on / off, lube on / off

Per-min/Per-Rev Feed Control

Provided

 

Program Edit

Relative/Absolute/Mixed Programming, Decimal Programming

Constant

Surface Speed Control

Provided

Work Coordinate System

G54~G59

Tool Offset

16

Subroutine Call

Provided

Tool Control

PLC Programming Control


Dimension:

    Horizontal Layout (H):

    Vertical Layout(V):