SMC-K1SB single axis CNC control system

Features:

SMC-K1SB is an economy new generation of single axis CNC system built by Beijing SAMCO CNC Technique Co., Ltd. in connection with the actual situation in China for full digital control servo driver or step motor driver. The control circuit employs an 8-bit new microprocessor, super-large-scale customized IC chip, multi-layer printed circuit board. The display is an LCD with the revolution of 320×240. The whole process for the system uses surface mount devices (SMD). Hence the whole system is compact, size is greatly reduced, and meanwhile the system reliability is improved further. For the control panel, CNC operation panel is integrated with machine panel, this has greatly simplified the connection between a CNC system and the machine tool. The full screen has Chinese menu, straight forward interface, the operation is simple and clear, so the system has a very high cost performance.

Specification:

Function	Name	Specification
Control axes	Control axes	1 axis（X）
Input command	Least command unit	0.001 mm
	Least increment unit	0.001 mm
	Max. command	±9999.999 mm
Feed	Rapid traverse rate	15m /min
	Feed rate range Per min	1～15000 mm/min
	Automatic acceleration/ deceleration	provided (linear，exponential)
	Feed rate override	0～150%
JOG	Manual continuous feed, returning zero by manual	provided
JOG	Step feed	0.001、0.01、0.1、1
Axis motion	Positioning, linear	G00, G01
Test	Dry run , Single block	provided
Coordinates and dwell	Dwell(s)	G04
	Work coordinates system setting	G50
	Auto coordinates system setting	provided
Run mode	MDI, AUTO, JOG, STEP, EDIT	provided
Safety function	Stored stroke limit check	provided
Safety function	Emergency stop	provided
Program edit and storage	Capacity of program and number	32K size and 63 programs
	Program editing	Insert ,alter and delete
	Program No, sequence No, address, word search	provided
	Decimal point input	provided
	Flash memory	provided ,6 region
Display	LCD	320×240
Display	Position, program, variety, alarm, diagnose and parameter	provided
DI/DO	DI/DO: 16/8	provided
M function	Miscellaneous function	M xx
Compensation	Backlash	provided
Macro function	Consumer macro(A)	provided
	Subprogram call	provided
	Subprogram protect	provided
Other function	Electronic gear ratio	provided
	The program can start from any point	provided
	Retain coordinates value at power off	provided
	axial rotation function	provided
	Overleap steps function（G31）	provided
Optional function	Simulative principal axis function (4-digit S code)	provided（8-bit D/A output）
	Additional operation interface
	Feed per revolution(encoder is 1024 pulses)	provided

Dimension: