SAMCO 2MA860H Two phase stepping motor driver

SAMCO 2MA860H two phase stepping motor driver key features:

1. AC 50-80(DC70-110V)power supply,adapt to the worst grip enviroment;
2. H bridge 2pole the constant phase flow subdivided driving;
3. Orignal creation speed self-adaption circuit,Automatic optimization;
4. Subdivision current setting is convent;
5. 1-64 subdivition 16 kinds of operating mode;
6. Over current,over voltage,under voltage,over temperature,short circuit protection;
7. Off-line ena protection function.

Electrical Indicators:

Instructions	Min values	Typical values	Max values
Supply voltage	1.5	-	6.0
Normal work output current		10
Logic input current		10
Step pulse correspond frequency	-	-	200
Pulse low level time	2.5	-	-

Environment indicators:

Cooling mode Natural cooling or forced cooling
Using environment	Occasion	Avoid oil mist,dust,corrosive gas
	Storage temperature	-10~80℃
	Max environment temperature	65℃
	environmen humidity	≤80%RH Non-Condensing,no frost
Vibration		5.9m/s2
Weight		0.6kg

Shape Dimension: unit=mm

描述图.jpg

Notice:

Ensure well ventilatcd when install the drive. regularly check the cooling fan in normal operation.
Ensre that the distance between is not less than 5cm;when multiple drivers are parallcl used in the cabinet. ground terminals must be cnnected well between driver and equipment,in order to ensure the safety of usage.